Using a Thunderbolt HUB to support connecting a Thunderbolt DAW Interface with Dual Ravens

When using a new Mac with a Thunderbolt DAW Interface and Dual Ravens, a Thunderbolt Dock/Hub will be needed. These Thunderbolt ports are backwards compatible with Mini DisplayPort connections. The dock supports either HDMI or Mini DisplayPort, but not both.

http://www.belkin.com/us/p/P-F4U085/

https://www.owcdigital.com/products/thunderbolt/thunderbolt-2-dock-overview

https://www.elgato.com/en/thunderbolt-2-dock

https://www.amazon.com/Elgato-Thunderbolt-Dock-Ethernet-aluminum/dp/B00PAPMSLE

One display should be plugged in the HUB and the other Display hooked directly into the Mac.

In order to use a Thunderbolt DAW Interface and Multiple screens follow these steps.

1. Plug the Thunderbolt dock into one of the Thunderbolt ports on the Mac.  

2. Plug the MTi2 HDMI into the HDMI port on the dock. For MTi1 use a DVI to HDMI converter.

3. Plug the Thunderbolt Interface into the other Thunderbolt port on the dock.

4. Plug the second MTi2 into the other thunderbolt port of the Mac using a Thunderbolt to HDMI adapter.

If using Thunderbolt 3 check out this article.  https://slatemediatechnology.zendesk.com/hc/en-us/articles/360033788033-Connecting-Raven-with-USB-C

For MTi1 use a DVI to Thunderbolt/MiniDisplay converter.

For MTi2 use a HDMI to Thunderbolt/MiniDisplay port.