Windows Studio One setup for RAVEN

Setting Up Studio One with V-Control Pro for RAVEN Windows.

 

The following article explains how to set up Studio One for the use with the RAVEN. To learn more about the general aspects of V-Control Pro, check out the Neyrinck Website.

1. Register the passcode that came in the box and activate iLok License

http://raven.dl.drumclassroom.net/

2. Install the RAVEN Software from within your Slate account

Screen_Shot_2019-08-08_at_12.33.29_PM.png

Go to this link and type in your login info to download the software.
http://users.drumclassroom.net

3. Configure Mackie Controllers for 24 Track RAVEN Faders

Open Studio One Preferences and select "External Devices"

Click the "Add" button and select Mackie-Control and set the input and output to V-Control Pro.
VCP_1.PNG

Click the "Add" button and select Mackie-Control Extended and set the input and output to V-Control Pro XT2

vcp_2.PNG

Click the "Add" button and select Mackie-Control Extended and set the input and output to V-Control Pro XT3

VCP_3.PNG

Click the "Placement" button and add the 3 Mackie Controller devices to the Group 1.placment.PNG

4. Import the RAVEN KeyScheme for Batch Command functionality. 

In this section, you will learn how to import the RAVEN key command for Studio One

Open Studio One Preferences and select the "Keyboard Shortcuts" from the General Tab.

Click the "Import" button and select the RAVEN Keyscheme. User can download this file from the link at the bottom of this article.


keyscheme.PNG

5. Configure the touch driver for your display setup. 

 6. Launch the RAVEN Software and Toolbars. 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

0 comments

Article is closed for comments.